What is a warehouse control system and do you need one?
A warehouse control system (WCS) is software that runs automated warehouse equipment, such as conveyors and sorters, using instructions from your warehouse management system (WMS). If your team picks by hand and nothing rides a conveyor, you don’t need one yet.
Interest in that equipment is growing. In the Linnworks Market Survey 2026, more than a third of 500 US and UK ecommerce decision-makers named warehouse operations as one of the areas where more automation would make the biggest difference. Among those who want more automation, 42% say cost holds them back and 39% name a lack of integration between their systems. A WCS adds to both, because it’s one more system to buy and connect.
Whether that cost is worth paying depends on how a WCS and a WMS divide the work, and how much more of it your WMS can take on first.
10 essential operational fixes every ecommerce business needs
Learn how growing ecommerce brands stop overselling, centralize orders, automate fulfillment and scale with confidence.
What is a warehouse control system?
A warehouse control system (WCS) is software that directs automated material handling equipment, such as conveyors, sorters, and carousels, as the equipment runs. Its job is to get the most throughput out of that equipment. Vendors also sell it as warehouse control software, and the two terms mean the same thing.
The WMS decides what work needs doing by allocating inventory to orders and sending tasks to the automated area. The WCS carries those tasks out on the equipment: it routes each item through the system, balances the load across machines so none sits idle while another backs up, and handles exceptions when an item doesn’t move as planned. Then it reports back. The WMS keeps the inventory record, and the WCS tells it what physically moved.
In a warehouse where people do the picking and nothing rides a conveyor, a WCS has nothing to direct.
What’s the difference between a WCS, WMS, and WES?
The warehouse control system, warehouse management system, and warehouse execution system (WES) divide the warehouse by who, or what, is doing the work.
| WMS | WCS | WES | |
|---|---|---|---|
| What it runs | Warehouse processes and the inventory record | Automated equipment such as conveyors, sorters, and carousels | Equipment and the people working alongside it |
| What takes its instructions | Warehouse staff through picklists and scanners, and the WCS where one exists | Machines | Machines and staff |
| When it’s typically added | First | When automated equipment goes in, becoming essential once equipment from several vendors needs coordinating | When the WMS lacks functionality a company needs and replacing it would be too disruptive, or to extend a WCS |
The WMS is the system most multichannel sellers already run or are shopping for. It handles receiving, putaway (assigning incoming inventory to a bin location), and picking and packing, and it holds the inventory count your sales channels sell against. Our guide to how to choose a warehouse management system covers what to look for.
The WCS sits between the WMS and the machines. It takes the tasks the WMS sends and turns them into instructions each piece of equipment can act on, such as which lane a carton takes on a conveyor or which chute a sorter drops it into. A WCS can coordinate equipment from several manufacturers, which is why it becomes essential once a warehouse runs machines from more than one vendor. Its view stops at the equipment, though. A WCS keeps no record of what you sell across your channels, and it doesn’t plan the work of the people around the machines.
A WES, like a WCS, manages equipment and adapts as conditions on the floor change. It also covers labor management and inventory control, so it can rebalance work across people and machines. If one step in a three-step process falls behind, a WES can move more labor onto that step and find other work for the first two until they line up again.
In practice, the labels blur. WCS vendors keep adding functionality that once came only with a WMS or a WES, so a product sold as one can do part of another’s job. When you compare systems, go by what each one controls and what takes its instructions. The name on the box is less reliable.
When do you need a warehouse control system?
The word automation suggests conveyors and robots. In the Linnworks 2026 State of Commerce Ops report, 64.8% of UK retailers and 60% of US retailers described their operations as majority or highly automated. That automation concentrates in order processing and routing, and in shipping label creation and carrier selection. Inventory sync across channels and the order and delivery updates sent to customers round out the areas retailers have automated most. All four are software.
A WCS enters the picture with equipment. Consafe Logistics, a vendor that sells both a WMS and a WCS, ties the need to how much automated equipment a warehouse runs and how complex that equipment is. A mostly manual operation with some simple automation can usually be directed from the WMS. The case for a WCS grows as machines are added, because each one tends to bring another vendor and another control system, until there are too many to coordinate without software built for the job.
Start pricing a WCS when both of these are true:
- Automated equipment is installed or on order: conveyors, sorters, or other machines that move inventory without a person carrying it.
- That equipment is complex or comes from more than one supplier: several machines or vendors have to run as one flow.
If the first isn’t true yet, the gains are in how your WMS directs people.
When should you add a WCS?
A WCS carries out the tasks the WMS sends it, so it can only be as accurate as the inventory record behind those tasks. If a bin location is wrong in the WMS, a conveyor moves the wrong item to the pack station just as efficiently as the right one.
Once equipment is on the table, though, the WCS belongs in the same conversation. Consafe Logistics warns against adding machines one at a time until a warehouse runs “islands of automation” (separate systems that can’t coordinate), which it says slows the return on the equipment. Many sellers are already cutting the number of systems they run. In the Linnworks Market Survey 2026, 38% of ecommerce businesses had consolidated their software tools in the past 12 to 18 months.
Some integration between the WCS and the WMS is always required. So ask any equipment vendor which WMS platforms its controls already connect to, and ask your WMS provider the same question in reverse.
A WCS optimizes the machines it controls. It may not account for the labor tied to a process, though, or keep throughput high across related processes outside its control. That gap is what a WES fills, and some WCS vendors now build that functionality in. If people still work alongside the equipment, ask how the system plans their part of the flow.
Get more out of your WMS first
Picking one order at a time sends a picker down the same aisle again and again for separate orders that want the same item. A WMS can cut that walking without adding equipment. In Linnworks warehouse management, wave picking groups open orders by pick location and routes the picker through the warehouse in one pass, finishing every pick at a location before moving to the next. Items go into labeled totes at the shelf, so the pack station knows what’s in each tote when it arrives. Wave picking runs on phones or tablets, with no dedicated scanning hardware.
Accuracy comes from scanning. You can require a barcode scan at three points: the item to confirm the SKU; the bin location to confirm it came from the right shelf; and the pack station to confirm the right items go into the box before it’s sealed. Once a scan is required, the system won’t register the pick until it’s made. And because inventory deducts when a pick is confirmed rather than when the order ships, your sales channels see the lower count sooner.
Our comparison of the best warehouse inventory management software for multichannel sellers looks at how six platforms handle picking and cycle counting.
Flag Nor Fail, a Montana activewear brand selling through Shopify, TikTok Shop, and Facebook, cut average order fulfillment time from 61 hours to under 22 on Linnworks. Before that, its previous inventory software pushed incorrect counts to Shopify, and every large sale or product release ended in oversells. Around 500 orders at a time sat to one side, waiting on items that were supposed to be in stock.
Brandon Hice joined the operations team in 2024 after running operations for a grocery chain and a soda distributor. He described the platform as giving Flag Nor Fail “the big-company tech behind your small business.” Hice points to two workflows. The first is hyperpicking, a batched picking workflow that groups and prioritizes orders. The second is a set of shipping rules the team built to assign a carrier based on weight, destination, and other order details.
Flag Nor Fail reports that oversells dropped from about 20 a week to roughly one every six months.
Where to start this week
Start with one day. Pull that day’s picklists from your WMS or your paper records, and for your busiest bin locations, count how many orders needed an item there and how many separate trips pickers made to it.
If the trips roughly match the orders, your team is picking order by order, and wave picking would fold those trips into one pass per wave. If the trips are already consolidated and picking is still the bottleneck, that’s when equipment, and the WCS that runs it, belong in the budget. Either way, the count shows how much more your WMS can do before you price a warehouse control system.
Bring that count to a Linnworks demo, along with a day of real orders, and see how wave picking would group them. If you’d rather benchmark your operation against peers first, the Linnworks Market Survey 2026 shows how 500 US and UK ecommerce businesses automate and what holds them back.
Get a Linnworks demo – automate inventory and orders faster
Book a Linnworks demo and see how it simplifies inventory, orders, and fulfillment. Get started today and optimize your eCommerce operations.
FAQ
Do I need a WCS if I use a 3PL?
No. If a 3PL handles your fulfillment, its systems run its warehouse floor, including any WCS behind its automated equipment. What you need is visibility of the inventory it holds for you. Linnworks shows inventory across your own warehouses and 3PLs in one view, and 3PL integrations such as ShipBob send shipping confirmations and tracking numbers back automatically.
What’s the difference between a WMS and inventory management software?
They cover different sides of the same inventory. Inventory management software tracks what you own and how much of it across every channel and location, so two channels don’t sell the same unit. A WMS runs the physical side: where inventory sits, how it’s picked, and how it moves between bins. In Linnworks, warehouse operations and multichannel inventory run in one platform, so there’s no sync between two systems to reconcile.
Is a WCS part of a WMS?
A WCS is sometimes part of a WMS. Some vendors sell both, and Consafe Logistics notes that buying them from one vendor lets manual and automated processes run on the same logic, with one point of contact for support. Other WCS products come from equipment suppliers and connect to whichever WMS the warehouse already runs.
What’s the difference between a WCS and a WES?
A WCS directs automated equipment such as conveyors and sorters. A WES also plans the work of the people alongside that equipment, so it can move labor between steps when one part of a process falls behind. Some WCS vendors now build WES functionality into their products.