Linnworks Order Management and Stock Control (Trial, Standard and Premium) can be deployed over the network or internet for multiuser usage. This document describes prenciple of deploying over the network on multiple computers.

One Server - many clients

Essentially linnworks standard installation is a server application,which installs database engine and components on your computer to be able to act as a database server that hosts Linnworks database. This server needs to be installed on one computer only, this computer in effect becomes the database host. In order to connect other computers to the server you need to install Linnworks client application (see download section). When installing client application the installer will ask for database connection to the server. The server name is generally [YOUR COMPUTER NAME]\FINAWARE, by default leave user name and password as is. Proceed to the installation as normal.

Note that the computer with the Linnworks server installed must be on the Local Area Network and must be in the accessable network group i.e. the client must be able to see the server and have access to its files.

 

Deploying over the internet

To deploy the system you must first make sure

• You have static IP address i.e. when you connect to the internet you don't get new IP address assigned
• You have a router and you have access to it's configuration page
• You can configure port forwarding and firewall settings on your internet router

Basic steps for configuring the system to be accessable over the internet are:

1. Configure the server to accept connections to the database
2. Configure the firewall on the server to allow incoming connection for the server
3. Configure port forwarding on your router
4. Allow your router's firewall to pass connections to the server
5. Configure client machine to connec to the database over IP port

Configure the server to accept connections to the database

1. Go to Start > Microsoft SQL Server 2005 > Configuration Tools > SQL Server Configuration Manager
2. Under SQL Server Native Client configuration set TCP/IP to enabled
3. Under SQL Server 2005 Network Configuration find Protocols for FINAWARE and enable TCP/IP protocol
4. Right click on the TCP/IP in Protocols for FINAWARE and select Properties
5. Select IP Addresses tab
6. under IP1 set Enabled to Yes
7. set IP address to the IP address of the comuter (server's ip address within your intenal network, not the internet IP address of the router. You can find out the IP address by executing ipconfig program from Command Prompt)
8. remove 0 from TCP Dynamic Ports
9. set TCP Port to 1433
10. remove 0 from TCP Dynamic Ports in AllIPs node
11. set TCP Port to 1433 in AllIPs node

Configure the firewall on the server to allow incoming connection for the server
Depending on the firewall you have installed. You have to allow incoming connections on port 1433. Please refer to the user manual for your installed Firewall

Configure port forwarding on your router

Depending on the make of your internet router. Below is the description of how to set up port forwarding on Belkin Wireless G-router

1. Login to the control panel by accessing the IP address of the router from Internet Explorer (or any other browser) i.e. 192.162.2.1
2. Go to Virtual Servers (could be called Port Forwarding or some other names, depending on the make of your router)
3. Add new port forwarding for external TCP/IP port 1433 to internal TCP/IP port 1433 and point at the IP address of the computer where FINAWARE server is installed
4. Save configuration and restart the router

Allow your router's firewall to pass connections to the server

Depending on the make of your router. Please refer to the user manual for your internet router

Configure client machine to connec to the database over IP port

When installing client application on a computer, on the Database Connection screen type the internet IP address of intead of the computer name. For example if your IP address (could be found out from http://whatismyipaddress.com/) 88.108.22.106, you simply replace (local)\FINAWARE with 88.108.22.106 and proceed as normal.

If the software already installed you will need to open a config file and edit the configuration settings manually

Open file C:\Program Files\Linn Systems\Finaware R3\finawareStockControl.exe.config in notepad, and edit the connection details in two places

 <add key="SQLSERVER" value="(local)\FINAWARE" />

 replace value="..." to value = "88.108.22.106" (your ip address)

also replace Data Source=(local)\SQLEXPRESS with Data Source=88.108.22.106

in  SQLCONNECTIONSTRING tag.

GOTO

Linnworks Downloads Documentation Training Videos News and Updates Submit support ticket Product Enquiry Purchase License Subscribe for license

Sales Enqruiry

Popular topics

eBay Inventory Synchronization - end listing, revise quantity and relist Managing orders fulfilled by drop ship supplier E-mail notifications automation Importing data from outside Address Label designer Royal Mail Despatch Express automation Cart integration (osCommerce, ZenCart, X-Cart, CubeCart etc) Magento Order Management and Stock Control Linnworks Integration eBay Inventory - ending listing, relisting and revising listing automatically